Features

• High efficient in moisture absorption, filtering impurity, acid, paint remains and mud removal
• Hybrid desiccant
• Durable and solid filter cores
• Filtering fineness: 20?m
• Corrosion resistant painting can survive salt spray test of 500 hours.
• Connection type: flare or solder

General specifications

• Applicable for all common HCFC, HFC, HC, HFO refrigerants such as: R22, R134a, R404A, R407C, R410A, R507A, R407F, R290, R1234ez
• Min./max. ambient temperature: -30°C to +55°C
• TS min./max.: -30°C / +120°C
• PS: 4,83 MPa
• Installation position: preferably installed in liquid line
• Certifications: UL/CSA and PED declaration

Technical Parameters

Note:
1) please contact Sanhua representative regarding applications with HFO

2) for propane (R290) only solder versions with tube connections below 25 mm (1 inch) can be used 

3) when the systems use oil with additive, it is not recommended to use a core with alumina

Selection Table (T Series)

Selection Formulas

Filter Driers for liquid line are manufactured in compliance with ARI Standard 710. Maximum flow rate of liquid refrigerant at a differential pressure of 0,07bar (1psi) is indicated by kW (ton) which is based on the temperature of liquid refrigerant 30°C (86°F), the evaporating temperature of -15º (5ºF) and the following mass flow:

• 0,40 kg/min/kW (3.1 lb/min/ton) R134a
• 0,53 kg/min/kW (4.1 lb/min/ton) R404A, R507
• 0,39 kg/min/kW (3.0 lb/min/ton) R22, R407C
• 0,36 kg/min/kW (2.8 lb/min/ton) R410A

Note: Data on water absorption is based on the following EPD (method: ASHRAE Standard 63.1):

• 60ppm R22
• 50ppm R134a, R404A, R507, R410A, R407C

Note: The above data is based on clean system at ideal conditions; with impurities accumulated in the filter, the flow may decrease.

Dimensions